Easy Connector

Information

Features

The Easy Connector is especially adapted to dispensers of sensitive products that require perfect hygiene. It is perfectly compatible with the Vitop® Original tap. The dispenser must be equipped with a pump. The connector doesn't work using just gravity flow.

It is extremely easy to disassemble and doesn't use a spring, making cleaning even easier.

The Easy Connector is apt for contact with food liquids. Various end-fittings are available: 6 mm and 10 mm diameters

Instructions

HOW TO USE THE CONNECTOR ?

Please take care to remove the tamper-proof seal of the tap before use.

1

Place the tap inside
the connector

2

Push (swivel) to close
the connector

3

Twist the red knob

1

Open the connector

2

Pull (swivel) to open the connector

3

Remove the connector

Some users simply flush a cleaning liquid periodically through the connector or let the entire connector sit in a sanitizing solution, but is also possible to disassemble the connector for complete cleaning of all components.

Taking the Easy Connector apart

1

Unscrew the end fitting

2

Remove the end fitting

3

Remove the valve

Putting the Easy Connector back together again

4

Replace the valve into the end-fitting

5

Assemble the connector, screw on the end-fitting tightly

6

When putting the connector back together after cleaning, it is important to reseat the valve the right side up.